HEAT RECOVERY AGGREGATE AT-10
Purpose of the development:
For heating water through the use of waste heat from combustion boilers that run on natural gas.
Recommended application field:
Areas of application: stationary heating and industrial boiler and heating boilers with heat with 4 MW and more (steam generating capacity of 6.5 t / h and more) that consume natural gas.
Technical characteristic:
Specifications:
- Heating capacity of 0.6 MW
- The cost of the products of combustion , cubic m . / Hr 10000
- The temperature of the combustion products
outlet , ° C 50
- The cost of water, which is heated t / h 20
- The heated water temperature , ° C 40
- The aerodynamic resistance , Pa 550
- Hydraulic resistance, 98 kPa
- The cost of fuel saved , cubic m . / Hr 65
- Overall dimensions 2696x1592x4745
- Weight, kg 3270
Advantages over analogues:
Advantages over existing analogues:
- Increased depth of the cooling of waste gases and involved a thermal cycle latent heat of vaporization, which is contained in the flue gas;
- Improved reliability and maintainability (calciner presence of circulating water and intercooler issued;
- Reduced aerodynamic drag.
The development stage readiness:
Introduced in production
Technical and economic effect:
Application unit AB-10 improves the fuel efficiency of boiler gas consumption by 7-10%. The payback period for the installation of the unit up to 2 years.
Description of the development:
() The heated water can be used in systems for domestic and industrial hot water and raw water as a chemical water purification systems.
Possibility of transfer abroad:
Licence's sale Realization of finished commodity
Photo
Country
Ukraine
For additional information turn to: E-mail: gal@uintei.kiev.ua
|